To quickly locate products, scroll through the category listings or use the text search. Click one or more boxes that best describe your needs, and matching products will be displayed. Can’t find exactly what you need? Call or email our team to custom-formulate a solution that is perfectly tailored to your needs.
To order products, or if you have any questions, do not hesitate to reach out at:
Email customerservice@paradigmlabs.us
Phone: (570) 345-2600 • Toll-Free: (888) 933-4554 • Fax: (570) 345-2800
Division
Product Applications
Product Markets
There are 44 products matching your search.
All Brite 102
ALL BRITE 102 cleaner specifically designed to clean and brighten aluminum and as a general truck wash. On aluminum ALL BRITE 102 leaves a...
ALL BRITE 102 cleaner specifically designed to clean and brighten aluminum and as a general truck wash. On aluminum ALL BRITE 102 leaves a “nickel-bright” shine and reduces soil build-up. ALL BRITE 102 is a proprietary blend that is not only effective but environmentally safe.
PACKAGING VARIATIONS
15 Gal Drum, 30 Gal Drum, 55 Gal Drum, 275 Gal Tote
Aluminum Brightening Apply full strength directly to surface to be cleaned and brightened. Some scrubbing may be required if the substrate is extremely dirty. Let set for 60 seconds and rinse thoroughly.
General Truck Wash Dilute ALL BRITE 102 50 to 1 with water and use in your normal washing system.
SAFETY Chemical resistant gloves and glasses.
FIRST AID Eye: Flush with water for 15 minutes. Consult a physician.
Skin: Wash with plenty of water. If skin is burned consult a physician.
Inhalation: Remove to fresh air. Consult a physician.
Ingestion: DO NOT induce vomiting. Drink 2 glasses of water. Consult a physician.
SPECIFICATIONS
Appearance: Clear liquid
pH: 10.2-10.5
Solubility: Completely soluble in water.
Specific gravity: 1.04
ANTIFOAM NOS is a specially formulated hydrocarbon type defoamer containing no silicone derivatives. The product is very active and only small...
ANTIFOAM NOS is a specially formulated hydrocarbon type defoamer containing no silicone derivatives. The product is very active and only small quantities are necessary to maintain adequate foam control. Uses include printing, dyeing, and other applications where silicone cannot be tolerated.
PACKAGING VARIATIONS
15 Gal Drum, 30 Gal Drum, 55 Gal Drum, 275 Gal Tote
- Eliminates foaming caused by dispersants, additives, or chemical auxiliaries.
- Will not spot.
- Forms stable dispersions.
- Highly effective - exceedingly small amounts needed.
- Has a sustained effect.
- No defoamer scum ring on equipment.
- Non-toxic.
- Completely biodegradable - will not pollute.
APPLICATION
ANTIFOAM NOS may be used at .25% - .50% levels or less. Application concentrations are determined by the degree of foam encountered. Best results are achieved when ANTIFOAM NOS is injected into the system prior to foam formation.
PHYSICAL PROPERTIES
Appearance: White, translucent liquid
Odor: Odorless
Solubility: Emulsifies in water
Ionic type: Nonionic
Density: 8.17 lbs/gallon
Package: 55 gallon drum
Specific gravity: .98
ANTIFOAM WA is a scientifically formulated defoamer meeting “Food Chemical Codex” specifications and containing low silicone derivatives. The...
ANTIFOAM WA is a scientifically formulated defoamer meeting “Food Chemical Codex” specifications and containing low silicone derivatives. The product is very active and only small quantities are necessary to maintain adequate foam control. Uses include food contact cleaning, printing, dyeing, and other applications where a small amount of silicone can be tolerated.
PACKAGING VARIATIONS
15 Gal Drum, 30 Gal Drum, 55 Gal Drum, 275 Gal Tote
- Eliminates foaming caused by dispersants, additives, or chemical cleaners.
- Will not spot.
- Forms stable dispersions.
- Highly effective - exceedingly small amounts needed.
- Has a sustained effect.
- No defoamer scum ring on equipment.
- Non-toxic.
- Completely biodegradable - will not pollute.
APPLICATION
ANTIFOAM WA may be used at .10 - .50% levels or less. Application concentrations are determined by the degree of foam encountered. Best results are achieved when ANTIFOAM WA is injected into the system prior to foam formation.
PHYSICAL PROPERTIES
Appearance: Translucent liquid.
Odor: Odorless
Solubility: Emulsifies in water
Ionic type: Cationic
Density: .993
Package: Plastic drum
BIOSOLV G is a biodegradable degreasing product used in lift stations to keep the lift station walls & equipment free from fats and grease. It works...
BIOSOLV G is a biodegradable degreasing product used in lift stations to keep the lift station walls & equipment free from fats and grease. It works by reacting with the fats and greases, solublizing them into the water and carrying them away. BIOSOLV G has a citrus odor and is safe to use.
PACKAGING VARIATIONS
15 Gal Drum, 30 Gal Drum, 55 Gal Drum, 275 Gal Tote
BIOSOLV G can be sprayed onto the sides of the lift station to clean them, or poured into the lift stations and permitted to float on the surface of the water to clean by the rising and falling of the water levels. The water levels should not be permitted to drop to a level that would cause the BIOSOLV G to be pumped off the top of the water.
SPECIFICATIONS
Appearance: Clear to pale yellow liquid
pH: 9.33
Specific gravity: 0.79
Weight/Gallon: 6.58#/gallon
Solubility: Insoluble until exposed to fats & grease
Odor: Citrus
D’LIMOSOL 55FA is a heavy-duty natural solvent-based cleaner used for heavy to light grease and oil cleaning. It is highly effective in cleaning...
D’LIMOSOL 55FA is a heavy-duty natural solvent-based cleaner used for heavy to light grease and oil cleaning. It is highly effective in cleaning steel, glass, iron, etc. D’LIMOSOL 55FA is a biodegradable, environmentally safe product.
PACKAGING VARIATIONS
15 Gal Drum, 30 Gal Drum, 55 Gal Drum, 275 Gal Tote
For medium to heavy grease and oil, use product straight. For light duty cleaning use at a 50 to 1 dilution. For medium duty cleaning use at a 25 to 1 dilution. For heavy duty cleaning use at a 10 to 1 dilution. Rinse D’LIMOSOL 55FA with hot water (140-160° F) for total removal of grease and oil.
PHYSICAL PROPERTIES
Color: Light yellow
Physical Form: Semi-viscous liquid
Odor: Citrus
Specific Gravity: .994
pH (1% Solution): 8.5 – 9.2
Solubility: Readily soluble in water
Stability: Very stable product
D’Limosol 55F is a heavy-duty natural solvent-based cleaner used for heavy to light grease and oil cleaning. It is highly effective in cleaning...
D’Limosol 55F is a heavy-duty natural solvent-based cleaner used for heavy to light grease and oil cleaning. It is highly effective in cleaning steel, glass, concrete and greasy laundry.
D’Limosol 55F is a biodegradable, environmentally safe product.
PACKAGING VARIATIONS
15 Gal Drum, 30 Gal Drum, 55 Gal Drum, 275 Gal Tote
Hard Surface Cleaning For extremely heavy grease and oil, work D’Limosol 55F 25% into the soil and rinse thoroughly. For light duty cleaning use 2 ounces per gallon and rinse. For medium duty cleaning use 4-6 ounces per gallon and rinse. For heavy duty cleaning use at a 10 to 1 dilution. Rinse D’Limosol 55F with hot water (140-160° F) for best results.
Laundry Where garments, uniforms or rags are soiled with grease or oil it is best to pretreat using D’limosol 55F straight or at a 50% cut. If added directly to the wash load, add 4-8 ounces per 10 pound of cloth. Wash at 140–1600F.
PHYSICAL PROPERTIES
Color: Light yellow
Physical Form: Semi-viscous liquid
Odor: Citrus
Specific Gravity: .994
pH (1% Solution): 8.0 ± .5
Solubility: Readily soluble in water
Stability: Very stable product
DEFOAMER 019-B was developed for use in textile wet processing, including pad, jig, boil-off, scouring, dyeing, finishing, and printing operations....
DEFOAMER 019-B was developed for use in textile wet processing, including pad, jig, boil-off, scouring, dyeing, finishing, and printing operations. It shows excellent foam knockdown, even in low concentrations and performs well in extended runs. It is stable over a wide range of pH values as well as temperature changes.
PACKAGING VARIATIONS
15 Gal Drum, 30 Gal Drum, 55 Gal Drum, 275 Gal Tote
DEFOAMER 019-B is most effective in controlling foam in aqueous systems. Concentrations of 0.25% to 0.5% based on the total mixture are suggested as a start, but often lower amounts are found to give the required defoaming action. Should it be necessary, depending upon the process, small amounts of DEFOAMER 019-B may be added at various time intervals throughout the processing period rather than add the full amount at the start of the process.
PHYSICAL PROPERTIES
Color: White
Physical Form: Viscous emulsion
Odor: Mild to odorless
Pounds/Gallon: 8.17
Type: Nonionic, low silicone
pH (2% solution): 8.0 ± 0.5
Dispersibility in water: Disperses readily
Stability: Stable (under normal storage)
Stability on Heating: Stable up to the boil
Stability on Freezing: Permanent separation may occur
DEFOAMER DC is an antifoam/defoamer for use to reduce the foam is water based systems which are used to manufacture personal care items or in...
DEFOAMER DC is an antifoam/defoamer for use to reduce the foam is water based systems which are used to manufacture personal care items or in equipment and effluent where incidental contact with food manufacturing equipment may occur. DEFOAMER DC has been formulated to disperse rapidly and completely in systems where little agitation is possible. Only the amounts required to destroy the foam should be used. This product was formulated meeting the following parts of CFR 21: 172.884, 176.200 and 178.34.
PACKAGING VARIATIONS
15 Gal Drum, 30 Gal Drum, 55 Gal Drum, 275 Gal Tote
DEFOAMER DC should be delivered into the system neat; not premixed with water because of separation of the active ingredients may occur. Injection into a feed pipe and mixing in the feed is acceptable because the entire package is being delivered at the same time.
Use concentrations can range from 20 PPM to .25% depending on the application and severity of foam.
Prevention of foam formation is always preferable to “killing” of foam.
PHYSICAL PROPERTIES
Color: White semiviscous liquid.
Odor: Almost odorless
Specific Gravity: .919
Pounds/Gallon: 7.64
Ionic Characteristics: Nonionic
Solubility: Completely dispersable in water.
Stability: Do not store in extreme temperatures.
DEFOAMER ML is a highly concentrated oil based defoamer for use in non-potable water systems. Due to its high concentration of active ingredients,...
DEFOAMER ML is a highly concentrated oil based defoamer for use in non-potable water systems. Due to its high concentration of active ingredients, relatively small quantities are needed to either destroy foam or prevent foam formation. DEFOAMER ML has been formulated to disperse rapidly and completely in systems where little agitation is possible.
PACKAGING VARIATIONS
15 Gal Drum, 30 Gal Drum, 55 Gal Drum, 275 Gal Tote
DEFOAMER ML should be delivered into the system neat; not premixed with water because of separation of the active ingredients may occur. Injection into a feed pipe and mixing in the feed is acceptable because the entire package is being delivered at the same time.
Use concentrations can range from 20 PPM to .25% depending on the application and severity of foam. Prevention of foam formation is always preferable to “killing” of foam.
PHYSICAL PROPERTIES
Color: Semi-transparent light yellow liquid
Odor: Mild oil
Specific Gravity: .919
Pounds/Gallon: 7.64
Ionic Characteristics: Nonionic
Solubility: Partially soluble in water. Completely soluble in oil and non-polar solvents.
Stability: Freezing point is well below freezing. If separation occurs, product can be reconstituted by mixing.
DEFOAMER ML-2 is a highly concentrated oil based defoamer for use in non-potable water systems. Due to its high concentration of active ingredients,...
DEFOAMER ML-2 is a highly concentrated oil based defoamer for use in non-potable water systems. Due to its high concentration of active ingredients, relatively small quantities are needed to either destroy foam or prevent foam formation. DEFOAMER ML-2 has been formulated to disperse rapidly and completely in systems where little agitation is possible.
PACKAGING VARIATIONS
15 Gal Drum, 30 Gal Drum, 55 Gal Drum, 275 Gal Tote
DEFOAMER ML-2 should be delivered into the system neat. If premixed with water, do so at time of injection because separation of the active ingredients may occur. Injection into a feed pipe and mixing in the feed is acceptable because the entire package is being delivered at the same time.
Use concentrations can range from 20 PPM to .25% depending on the application and severity of foam. Prevention of foam formation is always preferable to “killing” of foam.
PHYSICAL PROPERTIES
Color: Semi-transparent light yellow liquid.
Odor: Mild oil
Specific Gravity: .919
Pounds/Gallon: 7.64
Ionic Characteristics: Nonionic
Solubility: Soluble in water.
Stability: Freezing point is well below freezing. If separation occurs, product can be reconstituted by mixing.
DEFOAMER ML-X is a highly concentrated oil based defoamer for use in non-potable water systems. Due to its high concentration of active ingredients,...
DEFOAMER ML-X is a highly concentrated oil based defoamer for use in non-potable water systems. Due to its high concentration of active ingredients, relatively small quantities are needed to either destroy foam or prevent foam formation. DEFOAMER ML-X has been formulated to disperse rapidly and completely in systems where little agitation is possible.
PACKAGING VARIATIONS
15 Gal Drum, 30 Gal Drum, 55 Gal Drum, 275 Gal Tote
DEFOAMER ML-X should be delivered into the system neat. If premixed with water, do so at time of injection because separation of the active ingredients may occur. Injection into a feed pipe and mixing in the feed is acceptable because the entire package is being delivered at the same time.
Use concentrations can range from 20 PPM to .25% depending on the application and severity of foam.
Prevention of foam formation is always preferable to “killing” of foam.
PHYSICAL PROPERTIES
Color: Semi-transparent light yellow liquid.
Odor: Mild oil
Specific Gravity: .919
Pounds/Gallon: 7.64
Ionic Characteristics: Nonionic
Solubility: Soluble in water.
Stability: Freezing point is well below freezing. If separation occurs, product can be reconstituted by mixing.
DEFOAMER NSP is a nonsilicone defoamer/antifoam designed for the paper industry. It can be used to both prevent foam as an antifoam and destroy foam...
DEFOAMER NSP is a nonsilicone defoamer/antifoam designed for the paper industry. It can be used to both prevent foam as an antifoam and destroy foam as a defoamer. It does not contain VOC’s and is biodegradable which makes it perfect for today’s environmentally sensitive workplace.
PACKAGING VARIATIONS
15 Gal Drum, 30 Gal Drum, 55 Gal Drum, 275 Gal Tote
DEFOAMER NSP should be added to the head box, the pulping tank or to some point prior to sheet formation. Add it to a location where there is a good deal of agitation to ensure that it is completely dispersed throughout the pulp suspension. Since each mill has different foaming problems, it is best to start with the amount of defoamer currently being used.
PHYSICAL PROPERTIES
Appearance: White semiviscous liquid
Odor: Mild to odorless
Ionic Characteristics: Nonionic
pH: 8.0
Dispersibility in water: Readily Disperses
DEFOAMER NSP-3 is a nonsilicone defoamer/antifoam designed for the textile, inks, coatings, and paper industries. It can be used to both prevent foam...
DEFOAMER NSP-3 is a nonsilicone defoamer/antifoam designed for the textile, inks, coatings, and paper industries. It can be used to both prevent foam as an antifoam and destroy foam as a defoamer. It does not contain VOC’s and is biodegradable which makes it perfect for today’s environmentally sensitive workplace.
PACKAGING VARIATIONS
15 Gal Drum, 30 Gal Drum, 55 Gal Drum, 275 Gal Tote
PAPER: Defoamer NSP-3 should be added to the head box, the pulping tank or to some point prior to sheet formation. Add it to a location where there is a good deal of agitation to ensure that it is completely dispersed throughout the pulp suspension. Since each mill has different foaming problems, it is best to start with the amount of defoamer currently being used.
COATINGS & INK: add to the initial grind to prevent air entrapment. Adding additional product during letdown will help ensure a foam-free product. Usage recommendation: .5 – 1.5% depending on need.
TEXTILES: Defoamer NSP-3 is designed for use in both atmospheric and pressure equipment. It can be dispersed manually or with automated equipment. Usage varies depending on application. The starting point should be .25% OWF. Decrease or increase the amount as needed.
PHYSICAL PROPERTIES
Appearance: White semiviscous liquid
Odor: Mild to odorless
Ionic Characteristics: Nonionic
pH: 8.0
Dispersibility in water: Readily Disperses
DEFOAMER NZ-49 is a highly concentrated modified silicone antifoam developed specially for the treatment of foam problems in water systems. It is a...
DEFOAMER NZ-49 is a highly concentrated modified silicone antifoam developed specially for the treatment of foam problems in water systems. It is a combination of 12% silicone oils plus other non-silicone defoaming agents to give the widest possible use application. It is highly effective in both defoaming and preventing foam formation. DEFOAMER NZ-49 will work well in a wide range of pH and temperatures.
PACKAGING VARIATIONS
15 Gal Drum, 30 Gal Drum, 55 Gal Drum, 275 Gal Tote
DEFOAMER NZ-49 is most effective in aqueous systems. Depending on the application, concentrations of .01% to .50% may be needed to achieve a suitable defoaming action. In many cases, results can be obtained by using even lower dilutions. It has been determined that to defoam typical waste water with foam caused by nonionic and anionic surfactants that a rule of thumb is to use 1/5 the amount of defoamer to surfactant to prevent foam in waste water. For instance, if you identify that you have 100 ppm soaps for detergents, start with 20 ppm of Defoamer NZ-49. DEFOAMER NZ-49 is approximately 20% more active than our DEFOAMER WTC-10.
PHYSICAL PROPERTIES
Color: White
Physical Form: Semi-viscous emulsion
Viscosity: 1700 – 2500 cps
Pounds per gallon: 8.3
pH: 7-8
Type: Nonionic, modified silicone based
Solubility: Readily dispersible in water
Stability: Very stable product. If frozen, separation may occur.
DEFOAMER WA is a scientifically formulated food grade defoamer containing low silicone derivates. The product is very active and only small...
DEFOAMER WA is a scientifically formulated food grade defoamer containing low silicone derivates. The product is very active and only small quantities are necessary to maintain adequate foam control. Uses include food contact cleaning, printing, dyeing, and other applications where a small amount of silicone can be tolerated.
PACKAGING VARIATIONS
15 Gal Drum, 30 Gal Drum, 55 Gal Drum, 275 Gal Tote
- Eliminates foaming caused by dispersants, additives, or chemical cleaners.
- Will not spot.
- Forms stable dispersions.
- Highly effective - exceedingly small amounts needed.
- Has a sustained effect.
- No defoamer scum ring on equipment.
- Non-toxic.
- Completely biodegradable - will not pollute.
APPLICATION
DEFOAMER WA may be used at .10 - .50% levels or less. Application concentrations are determined by the degree of foam encountered. Best results are achieved when DEFOAMER WA is injected into the system prior to foam formation.
DEFOAMER WTC-10 is a highly concentrated modified silicone antifoam developed specially for the treatment of foam problems in water systems. It is a...
DEFOAMER WTC-10 is a highly concentrated modified silicone antifoam developed specially for the treatment of foam problems in water systems. It is a combination of 10% silicone oils plus other non-silicone defoaming agents to give the widest possible use application. It is highly effective in both defoaming and preventing foam formation. DEFOAMER WTC-10 will work well in a wide range of pH and temperatures.
PACKAGING VARIATIONS
15 Gal Drum, 30 Gal Drum, 55 Gal Drum, 275 Gal Tote
DEFOAMER WTC-10 is most effective in aqueous systems. Depending on the application, concentrations of .015% to .50% may be needed to achieve a suitable defoaming action. In many cases, results can be obtained by using even lower dilutions. It has been determined that to defoam typical waste water with foam caused by nonionic and anionic surfactants that a rule of thumb is to use 1/5 the amount of defoamer to surfactant to prevent foam in waste water. For instance, if you identify that you have 100 ppm soaps for detergents, start with 20 ppm of Defoamer WTC-10.
For best results, DEFOAMER WTC-10 should be added at a point in the system prior to the foam formation. It should be thoroughly mixed to ensure the most economical performance. A good place to introduce WTC-10 is just ahead of the waste water discharge pump, this promotes dispersion of the product.
PHYSICAL PROPERTIES
Color: White
Physical Form: Semi-viscous emulsion
Viscosity: 2500 – 4000 cps
Pounds per gallon: 8.38
Type: Nonionic, modified silicone based
Solubility: Readily dispersible in water
Stability: Very stable product. If frozen, separation may occur.
DEFOAMER WTC-15 is a highly concentrated modified silicone antifoam developed specially for the treatment of foam problems in water systems. It is a...
DEFOAMER WTC-15 is a highly concentrated modified silicone antifoam developed specially for the treatment of foam problems in water systems. It is a combination of 15% silicone oils plus other non-silicone defoaming agents to give the widest possible use application. It is highly effective in both defoaming and preventing foam formation. DEFOAMER WTC-15 will work well in a wide range of pH and temperatures.
PACKAGING VARIATIONS
15 Gal Drum, 30 Gal Drum, 55 Gal Drum, 275 Gal Tote
DEFOAMER WTC-15 is most effective in aqueous systems. Depending on the application, concentrations of 0.005% to 0.25% may be needed to achieve a suitable defoaming action. In many cases, results can be obtained by using even lower dilutions.
For best results, DEFOAMER WTC-15 should be added at a point in the system prior to the foam formation. It should be thoroughly mixed to ensure the most economical performance.
PHYSICAL PROPERTIES
Color: White
Physical Form: Semi-viscous emulsion
Odor: Mild, pleasant
Pounds/Gallon: 8.38
Type: Nonionic, modified silicone based
Solubility: Readily soluble in water
Stability: Very stable product. If frozen, separation may occur, but can be reconstitued upon thawing.
DEFOAMER WTC-20 is a highly concentrated modified silicone antifoam developed specially for the treatment of foam problems in water systems. It is a...
DEFOAMER WTC-20 is a highly concentrated modified silicone antifoam developed specially for the treatment of foam problems in water systems. It is a combination of 20% silicone oils plus other non-silicone defoaming agents to give the widest possible use application. It is highly effective in both defoaming and preventing foam formation. DEFOAMER WTC-20 will work well in a wide range of pH and temperatures.
PACKAGING VARIATIONS
15 Gal Drum, 30 Gal Drum, 55 Gal Drum, 275 Gal Tote
DEFOAMER WTC-20 is most effective in aqueous systems. Depending on the application, concentrations of 0.0025% to 0.12% may be needed to achieve a suitable defoaming action. In many cases, results can be obtained by using even lower dilutions.
For best results, DEFOAMER WTC-20 should be added at a point in the system prior to the foam formation. It should be thoroughly mixed to ensure the most economical performance.
PHYSICAL PROPERTIES
Color: White
Physical Form: Semi-viscous emulsion
Odor: Mild, pleasant
Pounds/Gallon: 8.5
Type: Nonionic, modified silicone based
Solubility: Readily soluble in water
Stability: Very stable product. If frozen, separation may occur.
DEFOAMER WTC-30 is a highly concentrated modified silicone antifoam developed specially for the treatment of foam problems in water systems. It is a...
DEFOAMER WTC-30 is a highly concentrated modified silicone antifoam developed specially for the treatment of foam problems in water systems. It is a combination of 30% silicone oils plus other non-silicone defoaming agents to give the widest possible use application. It is highly effective in both defoaming and preventing foam formation. DEFOAMER WTC-30 will work well in a wide range of pH and temperatures.
PACKAGING VARIATIONS
15 Gal Drum, 30 Gal Drum, 55 Gal Drum, 275 Gal Tote
DEFOAMER WTC-30 is most effective in aqueous systems. Depending on the application, concentrations of .005% to .25% may be needed to achieve a suitable defoaming action. In many cases, results can be obtained by using even lower dilutions.
For best results, DEFOAMER WTC-30 should be added at a point in the system prior to the foam formation. If should be thoroughly mixed to ensure the most economical performance.
If used to defoam a static foam problem, agitation or sprays may be necessary.
PHYSICAL PROPERTIES
Color: White
Physical Form: Semi-viscous emulsion.
Odor: Mild, pleasant.
Pounds per gallon: 8.38
Type: Nonionic, modified silicone based.
Solubility: Readily soluble in water.
Stability: Very stable product. If frozen, separation may occur.
DYANSOLV 22F is an outstanding biodegradable solvent detergent used to scour wool, cotton, nylon, and other natural and manmade fibers. DYNASOLV 22F...
DYANSOLV 22F is an outstanding biodegradable solvent detergent used to scour wool, cotton, nylon, and other natural and manmade fibers. DYNASOLV 22F also acts as a fantastic cleaner for metal surfaces and other hard surfaces.
PACKAGING VARIATIONS
15 Gal Drum, 30 Gal Drum, 55 Gal Drum, 275 Gal Tote
TEXTILES 1 - 2 % on weight of goods at 140oF - 160oF to remove oils, pectins, and other contaminants to permit processing of goods.
HARD SURFACES Use 1-5 % to clean most oils and greases from surface. Recommended temperatures are 140oF - 180oF. Higher amounts of DYNASOLV 22F and higher temperatures may be required on some heavy greases.
SPECIFICATIONS
Appearance: Light yellow viscous liquid
pH: 7.0 - 8.0
Solubility: Completely soluble in water
DYANSOLV 40 is an outstanding biodegradable, less foamy, solvent detergent used to scour wool, cotton, nylon, and other natural and manmade fibers....
DYANSOLV 40 is an outstanding biodegradable, less foamy, solvent detergent used to scour wool, cotton, nylon, and other natural and manmade fibers. DYNASOLV 40 also acts as a fantastic cleaner for metal surfaces and other hard surfaces.
PACKAGING VARIATIONS
15 Gal Drum, 30 Gal Drum, 55 Gal Drum, 275 Gal Tote
TEXTILES 1 - 2% on weight of goods at 140° F - 160° F to remove oils, pectins, and other contaminants to permit processing of goods.
HARD SURFACES Use .1 - .5% to clean most oils and greases from surface. Recommended temperatures are 140° F - 180° F. Higher amounts of DYNASOLV 40 and higher temperatures may be required on some heavy greases.
SPECIFICATIONS
Appearance: Light yellow viscous liquid
pH: 7.0 - 8.0
Solubility: Completely soluble in water
GREASE GOBBLER is designed as an all-purpose cleaner. It exhibits excellent surface wetting properties to lift soils so they can be washed away. It can be diluted depending on the cleaning job. The following are recommended dilutions of WATER: GREASE GOBBLER:
Grease: No Dilution
Heavy Oils: 3:1
Light Oils: 11:1
Brake Dust: 10:1
General purpose cleaning: 20:1
Windows: 50:1
Warm water will improve effectiveness on grease and heavy oils.
GREASE GOBBLER is used by the military for applications such as the cleaning of flight decks where heavy grease may be hazardous. In cold applications like this, it is recommended that the product be used straight or diluted not more than 3:1. Different solution rates may be necessary depending on the soils. Thorough rinsing may be required so that residues are not left behind.
PHYSICAL CHARACTERISTICS
Appearance: Blue liquid
pH (2%): 11.0 ± 0.5
Odor: Mild
Solubility: Completely soluble in water
Stability: Stable under normal storage conditions.
Store above 40oF.
GREASE GOBBLER PLUS is designed as an all purpose cleaner. It exhibits excellent surface wetting properties to lift soils so they can be washed away. It can be diluted depending on the cleaning job.
The following are recommended dilutions of WATER : GREASE GOBBLER PLUS:
Grease: No Dilution
Heavy Oils: 11:1
Light Oils: 3:1
Brake Dust: 10:1
Floors and general
purpose cleaning: 20:1
Windows: 50:1
Warm water will improve effectiveness on grease and heavy oils.
GREASE GOBBLER PLUS is used by the military for applications such as the cleaning of flight decks where heavy grease may be hazardous. In cold applications like this, it is recommended that the product be used straight or diluted not more than 3:1. Different solution rates may be necessary depending on the soils. Thorough rinsing may be required so that residues are not left behind.
PHYSICAL CHARACTERISTICS
Appearance: Clear liquid
pH: 10.0 ± 0.5
Odor: Mild
Solubility: Completely soluble in water
Stability: Stable under normal storage conditions. Store above 40oF.
THE GREASE GOBBLER WF is designed as an all purpose cleaner. It exhibits excellent surface wetting properties to lift soils so they can be washed away. It can be diluted depending on the cleaning job.
The following are recommended dilutions of WATER: THE GREASE GOBBLER WF:
Grease: No Dilution
Heavy Oils: 3:1
Light Oils: 11:1
Brake Dust: 10:1
Floors and general
purpose cleaning: 20:1
Windows: 50:1
Warm water will improve effectiveness on grease and heavy oils.
THE GREASE GOBBLER WF is used by the military for applications such as the cleaning of flight decks where heavy grease may be hazardous. In cold applications like this, it is recommended that the product be used straight or diluted not more than 3:1. Different solution rates may be necessary depending on the soils. Thorough rinsing may be required so that residues are not left behind.
PHYSICAL PROPERTIES
Appearance: Clear liquid
pH: 10.0 ± 0.5
Odor: Mild citrus odor
Solubility: Completely soluble in water
Stability: Stable under normal storage conditions. Store above 40° F.
GREEN & CLEAN is a concentrated/biodegradable cleaner specifically designed as a broad spectrum cleaner to remove soils in general cleaning...
GREEN & CLEAN is a concentrated/biodegradable cleaner specifically designed as a broad spectrum cleaner to remove soils in general cleaning including: dirt, oil, fats, grease, fingerprints, and many more GREEN &CLEAN is manufactured using the highest quality, environmentally friendly raw materials and contains no VOC’s. It is easily diluted and rinses completely. It is safe for most surfaces including metals, vinyl, painted substrates, glass, tile and most other surfaces requiring periodic cleaning.
PACKAGING VARIATIONS
15 Gal Drum, 30 Gal Drum, 55 Gal Drum, 275 Gal Tote
GREEN & CLEAN is a concentrated/biodegradable cleaner specifically designed as a broad spectrum cleaner to remove soils in general cleaning including: dirt, oil, fats, grease, fingerprints, and many more GREEN &CLEAN is manufactured using the highest quality, environmentally friendly raw materials and contains no VOC’s. It is easily diluted and rinses completely. It is safe for most surfaces including metals, vinyl, painted substrates, glass, tile and most other surfaces requiring periodic cleaning.
Thorough rinsing may be required so that residues are not left behind.
PHYSICAL CHARACTERISTICS
Appearance: Green liquid
pH (2%): 9-10
Odor: Clean and fresh
Solubility: Completely soluble in water
Stability: Stable under normal storage conditions.
Store above 40oF.
MIRAFLOC is a complete waste water treatment formulation designed to both flocculate out suspended solids and remove dissolved metals such as lead,...
MIRAFLOC is a complete waste water treatment formulation designed to both flocculate out suspended solids and remove dissolved metals such as lead, mercury, nickel, zinc, and copper. This helps ensure that a plant’s waste water meets or exceeds certain restrictions on heavy metals as well as suspended solids and color.
PACKAGING VARIATIONS
15 Gal Drum, 30 Gal Drum, 55 Gal Drum, 275 Gal Tote
MIRAFLOC works best at a pH between 8-10. Raise the pH to between 9 and 10 using either Pharagent S or caustic soda. With some agitation, add MIRAFLOC. The amount required will depend on the amount of suspended solids. Usually, .025% to .1% is sufficient. Once MIRAFLOC is added, recheck the pH to ensure that it is still 8-10. At this point, the floc will either sink or float depending on the specific gravity of the suspended solids.
Of the floc sinks, decant off the clear water and either return to your process for reuse or send down the drain. If the floc floats, either take the clear water from the bottom or skim off the floc.
The floc will have to be discarded in accordance with federal, state, and local regulations, depending on the characteristics of the waste being generated.
SPECIFICATIONS
Appearance: Clear liquid
Specific Gravity: 1.23
Weight/gallon: 10.26 lbs./gallon
pH: 2.0 to 3.0
Solids: 37% ± 1%
MIRAFLOC 100 is a complete wastewater treatment formulation designed to both flocculate out suspended solids and remove dissolved metals such as...
MIRAFLOC 100 is a complete wastewater treatment formulation designed to both flocculate out suspended solids and remove dissolved metals such as lead, mercury, nickel, zinc, and copper. This helps ensure that a plant’s waste water meets or exceeds certain restrictions on heavy metals as well as suspended solids and color.
PACKAGING VARIATIONS
15 Gal Drum, 30 Gal Drum, 55 Gal Drum, 275 Gal Tote
MIRAFLOC 100 works best at a pH between 8-10. Raise the pH to between 9 and 10 using either Pharagent S or caustic soda. With some agitation, add MIRAFLOC 100. The amount required will depend on the amount of suspended solids. Usually, .025% to .1% is sufficient. Once MIRAFLOC 100 is added, recheck the pH to ensure that it is still 8-10. At this point, the floc will either sink or float depending on the specific gravity of the suspended solids.
If the floc sinks, decant off the clear water and either return to your process for reuse or send down the drain. If the floc floats, either take the clear water from the bottom or skim off the floc.
The floc will have to be discarded in accordance with federal, state, and local regulations, depending on the characteristics of the waste being generated.
SPECIFICATIONS
Appearance: Clear liquid
Specific Gravity: 1.23
Weight/gallon: 10.26 lbs./gallon
pH: 2.0 to 3.0
Solids: 37% ± 1%
N-100 is a 100% active nonionic surfactant used for cleaning plastics, metals, and other hard surfaces. It is completely soluble in water. N-100 can...
N-100 is a 100% active nonionic surfactant used for cleaning plastics, metals, and other hard surfaces. It is completely soluble in water. N-100 can be used to remove oils, greases, adhesives, and most soils found in industry today. It contains special solubility agents to permit more activity on soils and to let it completely disperse throughout the cleaning system.
PACKAGING VARIATIONS
15 Gal Drum, 30 Gal Drum, 55 Gal Drum, 275 Gal Tote
N-100 can be used in concentrations of .1% to 2.0% depending on the soils being removed. Some soils such as heavy oils, greases, adhesives, and waxes may be removed best by using a highly caustic cleaner like Paraclean OMY in conjunction with N-100.
SPECIFICATIONS
Appearance: Clear, viscous liquid
pH: 6.5 ± 1.0
Solubility: Completely soluble in water
Ionic Characteristics: Nonionic
Activity: 100%
NA-108 is a 100% active nonionic/anionic surfactant used for cleaning plastics, metals, and other hard surfaces. It is completely soluble in water....
NA-108 is a 100% active nonionic/anionic surfactant used for cleaning plastics, metals, and other hard surfaces. It is completely soluble in water. NA-108 can be used to remove oils, greases, adhesives, and most soils found in industry today. It contains special solubility agents to permit more activity on soils and to let it completely disperse throughout the cleaning system.
PACKAGING VARIATIONS
15 Gal Drum, 30 Gal Drum, 55 Gal Drum, 275 Gal Tote
Appearance: Clear, light yellow liquid
pH: 7.5 ± 1.0
Solubility: Completely soluble in water
Ionic Characteristics: Nonionic/anionic
Foam Height: (2% solution) 200+ ml
Activity: 100%
Cloud Point: 196oF
APPLICATION
NA-108 can be used in concentrations of .1% to 2.0% depending on the soils being removed. Some soils such as heavy oils, greases, adhesives, and waxes may be removed best by using a highly caustic cleaner like Paraclean OMY in conjunction with NA-108.
NEUTRAL CLEANING: Blending .1% to 10.0% NA-108 with water will act as an excellent neutral hard surface cleaner. Application would include: car washes, floor cleaners, truck washes, spray washes, plastic cleaners, and metal cleaners.
CAUSTIC CLEANERS: By using 2-4% of NA-108 with 4-8% of 50% Caustic Soda, with the balance being water, a powerful general cleaning compound can be made to remove oils and strip waxes.
ACID CLEANERS: By using 2-10% of NA-108 with Phosphoric Acid or Muriatic Acid, a powerful acid cleaner can be produced to clean masonry or aluminum.
CHLORINE BLEACH CLEANER: 4-10% of NA-108 with Sodium Hypochlorite will clean food plants and piping. It will also act to clean dyeing equipment and floors which have been stained by dyes.
OXYPAR is a dry bleaching or pre-bleaching agent used for preparing fabric for dyeing light shades or to achieve a bright white without hazardous...
OXYPAR is a dry bleaching or pre-bleaching agent used for preparing fabric for dyeing light shades or to achieve a bright white without hazardous chemicals like hydrogen peroxide and caustic soda.
PACKAGING VARIATIONS
1 Gal Drum, 5 Gal Drum, 15 Gal Drum, 30 Gal Drum, 55 Gal Drum, 275 Gal Tote
OXYPAR can be used in concentrations of 2.0% to 5.0% (O.W.F.) depending on the speed of bleaching and whiteness desired. Using OXYPAR in conjunction with hydrogen peroxide will enhance the bleaching of cloth without any additional caustics or stabilizers needed.
OXYPAR is also used by individual laundries to return whites to their original brightness.
SPECIFICATIONS
Appearance: White powder
pH (2% solution): 10.5 ± .5
Solubility: Completely soluble in warm water
PARACID CR is a highly concentrated, low foaming acid cleaner specifically designed to clean and brighten aluminum, stainless steel, galvanized steel...
PARACID CR is a highly concentrated, low foaming acid cleaner specifically designed to clean and brighten aluminum, stainless steel, galvanized steel and masonry. On aluminum, PARACID CR leaves a “nickel-bright” shine and reduces soil build-up. PARACID CR will also remove lime, scale and mildew from tile and concrete as well as many other surfaces.
PARACID CR is a proprietary blend that is not only effective, but environmentally safe as well.
PACKAGING VARIATIONS
15 Gal Drum, 30 Gal Drum, 55 Gal Drum, 275 Gal Tote
Start with straight product. Determine most effective level for your needs.
Spray on surface to be cleaned and allow to sit for several minutes.
Flush with clean water until all residue is removed.
Prolonged exposure on glass may cause the glass to discolor or cloud.
SPECIFICATIONS
Appearance: Clear liquid
pH: 3.0-4.0
Solubility: Completely soluble in water.
Specific gravity: 1.18
SAFETY
Clothing: Chemical resistant gloves, goggles and apron.
FIRST AID
Eye: Flush with water for 15 minutes. Consult a physician.
Skin: Wash with plenty of water. If skin is burned consult a physician.
Inhalation: Remove to fresh air. Consult a physician.
Ingestion: DO NOT induce vomiting. Drink 2 glasses of water. Consult a physician
PARACID HD is a highly concentrated acid cleaner specifically designed to clean and brighten aluminum, stainless steel, galvanized steel and masonry....
PARACID HD is a highly concentrated acid cleaner specifically designed to clean and brighten aluminum, stainless steel, galvanized steel and masonry. On aluminum, PARACID HD leaves a “nickel-bright” shine and reduces soil build-up. PARACID HD will also remove lime, scale and mildew from tile and concrete as well as many other surfaces.
PARACID HD is a proprietary blend that is not only effective, but environmentally safe as well.
PACKAGING VARIATIONS
15 Gal Drum, 30 Gal Drum, 55 Gal Drum, 275 Gal Tote
Start with straight product. Determine most effective level for your needs. Spray on surface to be cleaned and allow to sit for several minutes. Flush with clean water until all residue is removed. Prolonged exposure on glass may cause the glass to discolor or cloud.
SAFETY Clothing: Chemical resistant gloves, goggles and apron.
FIRST AID
Eye: Flush with water for 15 minutes. Consult a physician.
Skin: Wash with plenty of water. If skin is burned consult a physician.
Inhalation: Remove to fresh air. Consult a physician.
Ingestion: DO NOT induce vomiting. Drink 2 glasses of water. Consult a physician.
SPECIFICATIONS
Appearance: Clear liquid
pH: 3.0-4.0
Solubility: Completely soluble in water.
Specific gravity: 1.18
PARACID HD2 is a highly concentrated phosphoric cleaner specifically designed to clean and brighten aluminum, stainless steel, galvanized steel and...
PARACID HD2 is a highly concentrated phosphoric cleaner specifically designed to clean and brighten aluminum, stainless steel, galvanized steel and masonry. On aluminum PARACID HD2 leaves a “nickel-bright” shine and reduces soil build-up. PARACID HD2 will also remove lime, scale and mildew from tile and concrete as well as many other surfaces.
PACKAGING VARIATIONS
15 Gal Drum, 30 Gal Drum, 55 Gal Drum, 275 Gal Tote
PARACID HD2 can not be used in food. However, it can be used to clean vessels and piping since it is manufactured in accordance with USDS requirements. When used on food handling equipment rinse thoroughly with clean potable water to remove all residue.
SPECIFICATIONS
Appearance: Clear liquid
pH: 3.0-4.0
Solubility: Completely soluble in water.
Specific gravity: 1.18
APPLICATION
Spray on surface to be cleaned and allow to sit for several minutes. Flush with clean water until all residue is removed. Prolonged exposure on glass may cause the glass to discolor or cloud.
SAFETY Clothing: Chemical resistant gloves, goggles and apron.
FIRST AID
Eye: Flush with water for 15 minutes. Consult a physician.
Skin: Wash with plenty of water. If skin is burned consult a physician.
Inhalation: Remove to fresh air. Consult a physician.
Ingestion: Do NOT induce vomiting. Drink 2 glasses of water. Consult a physician.
PARACID PF is a highly concentrated acid cleaner specifically designed for brightening aluminum. It is a proprietary blend of ingredients that are...
PARACID PF is a highly concentrated acid cleaner specifically designed for brightening aluminum. It is a proprietary blend of ingredients that are not only effective but environmentally safe as well.
PACKAGING VARIATIONS
15 Gal Drum, 30 Gal Drum, 55 Gal Drum, 275 Gal Tote
Spray on surface to be cleaned and allow to sit for several minutes.
Flush with clean water until all residue is removed.
Prolonged exposure on glass may cause the glass to discolor or cloud.
SPECIFICATIONS
Appearance: Clear liquid
pH: 3.0-4.0
Solubility: Completely soluble in water.
Specific gravity: 1.18
PARACID SS is a highly concentrated phosphoric acid based cleaner designed to clean stainless steel, aluminum, concrete and ceramic surfaces. It...
PARACID SS is a highly concentrated phosphoric acid based cleaner designed to clean stainless steel, aluminum, concrete and ceramic surfaces. It works well to remove scale buildup in dye tanks. PARACID SS will remove oils, algae, and hard water scale.
PACKAGING VARIATIONS
15 Gal Drum, 30 Gal Drum, 55 Gal Drum, 275 Gal Tote
PARACLEAN 918 is a high foaming neutral cleaner used to clean painted surfaces such as automobiles, trucks, equipment, fiberglass, finished floors,...
PARACLEAN 918 is a high foaming neutral cleaner used to clean painted surfaces such as automobiles, trucks, equipment, fiberglass, finished floors, and any other surface where repeated washing is needed. PARACLEAN 918 will penetrate and lift soils while preserving the finish.
PACKAGING VARIATIONS
15 Gal Drum, 30 Gal Drum, 55 Gal Drum, 275 Gal Tote
PARACLEAN 918 is designed as a neutral cleaner. It exhibits excellent surface wetting properties to lift soils from contaminated surfaces so they can be washed away. It can be used from 1% to 5%, depending on the application. Dilution rates will depend on amount and type of soil, how the cleaner is applied, water temperature, and mechanical action. PARACLEAN 918 is completely biodegradable.
For extremely difficult soil removal - NOTE: GREASE GOBBLER can be used as a pretreat or as an additive to remove bugs, for diesel fumes and other road soils.
PHYSICAL PROPERTIES
Appearance: Clear, slightly viscous liquid
pH: 7.0 ± 0.5
Odor: Mild
Solubility: Completely soluble in water
Stability: Stable under normal conditions. Store above 40oF
PARACLEAN IR-100 is a concentrated cleaner specifically designed to remove inks and other soils from print screens, printing presses, and can also be...
PARACLEAN IR-100 is a concentrated cleaner specifically designed to remove inks and other soils from print screens, printing presses, and can also be used as a non-solvent blanket wash.
PACKAGING VARIATIONS
15 Gal Drum, 30 Gal Drum, 55 Gal Drum, 275 Gal Tote
PARACLEAN IR-100 is designed as a concentrated ink remover. It exhibits excellent surface wetting properties to lift inks and other soils so they can be washed away. It can be diluted depending on the difficulty. The following are recommended dilutions of WATER to PARACLEAN IR-100:
Dried on inks: No Dilution
Medium difficulty: 1:1
Normal ink removal: 3:1
Thorough rinsing may be required so that residues are not left behind.
PHYSICAL CHARACTERISTICS
Appearance: Orange liquid
pH (2%): 10.5 ± 0.5
Odor: Mild
Solubility: Completely soluble in water
Stability: Stable under normal storage conditions.
Store above 40oF.
PARACLEAN OMY is a heavy-duty cleaner for ferrous metals and plastics that have been developed specifically for the recycling business. It is highly...
PARACLEAN OMY is a heavy-duty cleaner for ferrous metals and plastics that have been developed specifically for the recycling business. It is highly effective in cleaning steel, iron, and all plastic products such as plastic from milk and soda containers.
PACKAGING VARIATIONS
15 Gal Drum, 30 Gal Drum, 55 Gal Drum, 275 Gal Tote
PARACLEAN OMY is most effective when used at a 6-15 minute dwell time with temperatures of 160-165° F. A 1%-3% solution is all that is needed to thoroughly clean plastic and metals without leaving any type of residue. Higher concentrations are able to be used, but quite often are not necessary.
Do not use on white metals such as aluminum, zinc, magnesium and their alloys.
CAUTION: Material is caustic - use impervious gloves, splash-proof goggles, face shields, and aprons when handling.
PHYSICAL PROPERTIES
Color: White/off white
Physical Form: Granular
Odor: Citrus; pleasant
pH (1% solution): 14
Solubility: Readily soluble in water
Stability: Very stable product
PRESS RELEASE 918 is a safe, mild, and environmentally friendly compound used in applications in the paper, textile, mining, and transportation...
PRESS RELEASE 918 is a safe, mild, and environmentally friendly compound used in applications in the paper, textile, mining, and transportation industries. Due to their effectiveness to wet out surfaces as well as chemically removing oils, greases, tars, and pitch, and washing them away with water, they are an excellent choice.
PACKAGING VARIATIONS
15 Gal Drum, 30 Gal Drum, 55 Gal Drum, 275 Gal Tote
REZ-AWAY is a powerful cleaning agent designed to remove water-based resins such as latex and acrylics as well as greases, oils, and any other...
REZ-AWAY is a powerful cleaning agent designed to remove water-based resins such as latex and acrylics as well as greases, oils, and any other contaminants. It can be used to clean resins from pumps, clean dye equipment between colors, degrease metal parts, clean floors, and can even clean lab glassware. It also works great as a cleaner for screens in screen printing.
PACKAGING VARIATIONS
15 Gal Drum, 30 Gal Drum, 55 Gal Drum, 275 Gal Tote
Resins Spray full strength onto surface and let set for 1-2 minutes. In most cases, you can spray the resin away with a hose. If resin is difficult, some light brushing may be necessary.
Many applications may permit you to mix REZ-AWAY
Applications include:
- Resin clean-ups from tanks, pumps, and floors
- Cleaning screen printing equipment and screens
- Dye equipment
- Textile dryers
- Metal parts cleaning
- Engine degreasing
PHYSICAL PROPERTIES
Color: Clear to pale yellow liquid
pH: > 12.0
Specific gravity: 1.04
Solubility: Completely soluble in water
Stability: Stable under normal storage conditions. Store above 400F.
SR-1215 is a highly efficient multi-purpose caustic cleaner. This product has been developed to clean heavy grease and soils on railcars, heavy...
SR-1215 is a highly efficient multi-purpose caustic cleaner. This product has been developed to clean heavy grease and soils on railcars, heavy equipment, machinery and floors. SR-1215 has also been used to clean the heavy film build up on glass associated with soot, diesel fumes and road soils.
PACKAGING VARIATIONS
15 Gal Drum, 30 Gal Drum, 55 Gal Drum, 275 Gal Tote
SR-1215 exhibits excellent surface wetting properties to penetrate and lift soils so they can be washed away with minimal scrubbing. SR-1215 is water soluble, environmentally safe, is completely free-rinsing, and leaves a clean, residue-free surface. (Please note that due to its caustic composition SR-1215 should not be used on white metals.)
Since SR-1215 is highly concentrated compound, various dilutions with water can be used depending on the type of soils and soiled surfaces being treated.
PHYSICAL PROPERTIES
Appearance: Clear liquid
pH: > 13
Odor: Mild
Solubility in water: Completely soluble in water
Specific Gravity: 1.06
TiTAN WASH is the essential first step in the TiTAN RDS, dilutes easily, and prepares roofing substrates for the next step in the TiTAN Roof Defense...
TiTAN WASH is the essential first step in the TiTAN RDS, dilutes easily, and prepares roofing substrates for the next step in the TiTAN Roof Defense System. TiTAN WASH is a concentrated, biodegradable cleaner manufactured using the highest quality, environmentally friendly, raw materials and contains zero VOCs. TiTAN WASH removes grease, oil, dirt, pollen, tree sap, and more. WASH is safe for shrubbery and plants near buildings; it does not contain harmful chemicals that would potentially kill evergreens or other delicate plants. TiTAN WASH rinses completely and is formulated for use in conjunction with the TiTAN RDS system. For use on metals, TPO, concrete and other roofing substrates.
The following are recommended dilutions of WATER: TiTAN WASH:
Grease: No Dilution
Heavy Oils: 3:1
Light Oils: 11:1
General purpose cleaning: 20:1
Warm water will improve effectiveness on grease and heavy oils.
In cold applications, it is recommended that the product be used straight or diluted not more than 3:1. Different solution rates may be necessary depending on the soils. Thorough rinsing may be required so that residues are not left behind.
PHYSICAL CHARACTERISTICS
Appearance: Blue liquid
pH (2%): 11.0 ± 0.5
Odor: Mild
Solubility: Completely soluble in water
Stability: Stable under normal storage conditions.
Store above 40oF.
VINYL WASHING THINNER is used as a solvent based thinner specified for use on coatings, including, polyester and epoxy resins, vinyl, ink, and...
VINYL WASHING THINNER is used as a solvent based thinner specified for use on coatings, including, polyester and epoxy resins, vinyl, ink, and adhesives.
PACKAGING VARIATIONS
15 Gal Drum, 30 Gal Drum, 55 Gal Drum, 275 Gal Tote
WIRE WASH is a solvent based cleaner suitable for trimming shower spray, trim knock off shower, high pressure washing of: forming fabrics, felts,...
WIRE WASH is a solvent based cleaner suitable for trimming shower spray, trim knock off shower, high pressure washing of: forming fabrics, felts, dandy roll outside cleaning and removing stickies.
PACKAGING VARIATIONS
15 Gal Drum, 30 Gal Drum, 55 Gal Drum, 275 Gal Tote
