To quickly locate products, scroll through the category listings or use the text search. Click one or more boxes that best describe your needs, and matching products will be displayed. Can’t find exactly what you need? Call or email our team to custom-formulate a solution that is perfectly tailored to your needs.
To order products, or if you have any questions, do not hesitate to reach out at:
Email customerservice@paradigmlabs.us
Phone: (570) 345-2600 • Toll-Free: (888) 933-4554 • Fax: (570) 345-2800
Division
Product Applications
Product Markets
There are 23 products matching your search.
Antifoam NOS
ANTIFOAM NOS is a specially formulated hydrocarbon type defoamer containing no silicone derivatives. The product is very active and only small...
ANTIFOAM NOS is a specially formulated hydrocarbon type defoamer containing no silicone derivatives. The product is very active and only small quantities are necessary to maintain adequate foam control. Uses include printing, dyeing, and other applications where silicone cannot be tolerated.
PACKAGING VARIATIONS
15 Gal Drum, 30 Gal Drum, 55 Gal Drum, 275 Gal Tote
- Eliminates foaming caused by dispersants, additives, or chemical auxiliaries.
- Will not spot.
- Forms stable dispersions.
- Highly effective - exceedingly small amounts needed.
- Has a sustained effect.
- No defoamer scum ring on equipment.
- Non-toxic.
- Completely biodegradable - will not pollute.
APPLICATION
ANTIFOAM NOS may be used at .25% - .50% levels or less. Application concentrations are determined by the degree of foam encountered. Best results are achieved when ANTIFOAM NOS is injected into the system prior to foam formation.
PHYSICAL PROPERTIES
Appearance: White, translucent liquid
Odor: Odorless
Solubility: Emulsifies in water
Ionic type: Nonionic
Density: 8.17 lbs/gallon
Package: 55 gallon drum
Specific gravity: .98
ANTIFOAM WA is a scientifically formulated defoamer meeting “Food Chemical Codex” specifications and containing low silicone derivatives. The...
ANTIFOAM WA is a scientifically formulated defoamer meeting “Food Chemical Codex” specifications and containing low silicone derivatives. The product is very active and only small quantities are necessary to maintain adequate foam control. Uses include food contact cleaning, printing, dyeing, and other applications where a small amount of silicone can be tolerated.
PACKAGING VARIATIONS
15 Gal Drum, 30 Gal Drum, 55 Gal Drum, 275 Gal Tote
- Eliminates foaming caused by dispersants, additives, or chemical cleaners.
- Will not spot.
- Forms stable dispersions.
- Highly effective - exceedingly small amounts needed.
- Has a sustained effect.
- No defoamer scum ring on equipment.
- Non-toxic.
- Completely biodegradable - will not pollute.
APPLICATION
ANTIFOAM WA may be used at .10 - .50% levels or less. Application concentrations are determined by the degree of foam encountered. Best results are achieved when ANTIFOAM WA is injected into the system prior to foam formation.
PHYSICAL PROPERTIES
Appearance: Translucent liquid.
Odor: Odorless
Solubility: Emulsifies in water
Ionic type: Cationic
Density: .993
Package: Plastic drum
DEFOAMER 019-B was developed for use in textile wet processing, including pad, jig, boil-off, scouring, dyeing, finishing, and printing operations....
DEFOAMER 019-B was developed for use in textile wet processing, including pad, jig, boil-off, scouring, dyeing, finishing, and printing operations. It shows excellent foam knockdown, even in low concentrations and performs well in extended runs. It is stable over a wide range of pH values as well as temperature changes.
PACKAGING VARIATIONS
15 Gal Drum, 30 Gal Drum, 55 Gal Drum, 275 Gal Tote
DEFOAMER 019-B is most effective in controlling foam in aqueous systems. Concentrations of 0.25% to 0.5% based on the total mixture are suggested as a start, but often lower amounts are found to give the required defoaming action. Should it be necessary, depending upon the process, small amounts of DEFOAMER 019-B may be added at various time intervals throughout the processing period rather than add the full amount at the start of the process.
PHYSICAL PROPERTIES
Color: White
Physical Form: Viscous emulsion
Odor: Mild to odorless
Pounds/Gallon: 8.17
Type: Nonionic, low silicone
pH (2% solution): 8.0 ± 0.5
Dispersibility in water: Disperses readily
Stability: Stable (under normal storage)
Stability on Heating: Stable up to the boil
Stability on Freezing: Permanent separation may occur
DEFOAMER DC is an antifoam/defoamer for use to reduce the foam is water based systems which are used to manufacture personal care items or in...
DEFOAMER DC is an antifoam/defoamer for use to reduce the foam is water based systems which are used to manufacture personal care items or in equipment and effluent where incidental contact with food manufacturing equipment may occur. DEFOAMER DC has been formulated to disperse rapidly and completely in systems where little agitation is possible. Only the amounts required to destroy the foam should be used. This product was formulated meeting the following parts of CFR 21: 172.884, 176.200 and 178.34.
PACKAGING VARIATIONS
15 Gal Drum, 30 Gal Drum, 55 Gal Drum, 275 Gal Tote
DEFOAMER DC should be delivered into the system neat; not premixed with water because of separation of the active ingredients may occur. Injection into a feed pipe and mixing in the feed is acceptable because the entire package is being delivered at the same time.
Use concentrations can range from 20 PPM to .25% depending on the application and severity of foam.
Prevention of foam formation is always preferable to “killing” of foam.
PHYSICAL PROPERTIES
Color: White semiviscous liquid.
Odor: Almost odorless
Specific Gravity: .919
Pounds/Gallon: 7.64
Ionic Characteristics: Nonionic
Solubility: Completely dispersable in water.
Stability: Do not store in extreme temperatures.
DEFOAMER EFS-ST 10 is a highly concentrated modified silicone antifoam developed specifically for the treatment of foam problems in HDPE/LDPE/PET...
DEFOAMER EFS-ST 10 is a highly concentrated modified silicone antifoam developed specifically for the treatment of foam problems in HDPE/LDPE/PET water systems. This product combines 7 active ingredients, which help tackle all types of foam at temperatures between 35 F - 200 F. It is a combination of silicone oils plus other non-silicone defoaming agents. DEFOAMER EFS-ST 10 is designed as a food grade and Kosher product and meets the requirements of CFR 173.340.
DEFOAMER EFS-ST 10 is most effective in aqueous systems. Depending on the application,
concentrations of .005% to 0.50% may be needed to achieve a suitable defoaming action. In many cases,
results can be obtained by using even lower dilutions. It has been determined that to defoam typical
wastewater with foam caused by nonionic and anionic surfactants, a rule of thumb is to use 1/5 the
amount of Defoamer to surfactant to prevent foam in wastewater. For instance, if you identify that you
have 100 ppm soaps for detergents, start with 20 ppm of DEFOAMER EFS-ST 10? EFS-ST10 utilizes
multiple defoaming chemistries and is up to five times more effective than DEFOAMER WTC-10.
For best results, DEFOAMER EFS-ST 10 should be added at a point in the system prior to foam formation.
It should be thoroughly mixed to ensure the most economical performance. A good place to introduce
EFS-ST 10 is just ahead of the wastewater discharge pump, that will promote dispersion of the product.
DEFOAMER KEYSTONE 10K is a highly concentrated modified silicone antifoam developed specifically for the treatment of foam problems in water systems....
DEFOAMER KEYSTONE 10K is a highly concentrated modified silicone antifoam developed specifically for the treatment of foam problems in water systems. it is a combination of silicone oils plus other non-silicone defoaming agents to give the widest possible use application. It is highly effective in both defoaming and preventing foam formation. DEFOAMER KEYSTONE 10K is designed as a food grade product and meets the requirements of CFR 173.340
DEFOAMER KEYSTONE 10-K is most effective in aqueous systems. Depending on the application, concentrations of .015% to 0.50% may be needed to achieve a suitable defoaming action. In many cases, results can be obtained by using even lower dilutions. It has been determined that to defoam typical wastewater with foam caused by nonionic and anionic surfactants, a rule of thumb is to use 1/5 the amount of Defoamer to surfactant to prevent foam in wastewater. For instance, if you identify that you have 100 ppm soaps for detergents, start with 20 ppm of DEFOAMER KEYSTONE 10K. EFS-ST10 utilizes multiple defoaming chemistries and is up to five times more effective than DEFOAMER WTC-10.
For best results, DEFOAMER KEYSTONE 10K should be added at the point in the system prior to foam formation. It should be thoroughly mixed to ensure the most economical performance. A good place to introduce KEYSTONE 10K is just ahead of the wastewater discharge pump. This will promote dispersion of the product.
PHYSICAL PROPERTIES:
Color: White
Physical Form: Semi- viscous emulsion
Viscosity: 1500 300 cps
Actives: 20%
Pounds Per Gallon: 8.38
Type: Nonionic, modified silicone based
Solubility: Readily dispersible in water
Stability: Very stable product If frozen, separation may occur
DEFOAMER KFP-20 is a highly concentrated modified silicone Antifoam developed specifically for the treatment of foam problems in water systems. It is...
DEFOAMER KFP-20 is a highly concentrated modified silicone Antifoam developed specifically for the treatment of foam problems in water systems. It is a combination of silicone oils plus other non-silicone defoaming agents to give the widest possible use application. It is highly effective in both defoaming and preventing foam formation. DEFOAMER KFP-20 is designed as a food-grade product and meets the requirements of CFR 173.340. This material has also been approved Kosher for Passover.
APPLICATION:
DEFOAMER KFP-20 is most effective in aqueous systems. Depending on the application, concentrations of .005% to 0.50% may be needed to achieve a suitable defoaming action. In many cases, results can be obtained by using even lower dilutions. It has been determined that to defoam typical wastewater with foam caused by nonionic and anionic surfactants, a rule of thumb is to use 1/5 the amount of Defoamer to surfactant to prevent foam in wastewater. For instance, if you identify that you have 100 ppm soaps for detergents, start with 20 ppm of DEFOAMER KFP-20.
PHYSICAL PROPERTIES:
Color: White
Physical Form: Semi-viscous emulsion
Viscosity: 2500 - 4000 cps
Actives: 20%
Pounds Per Gallon: 8.38
Type: Nonionic, modified silicone-based
Solubility: Readily dispersible in water
Stability: Very stable product. If frozen, separation may occur.
DEFOAMER ML is a highly concentrated oil based defoamer for use in non-potable water systems. Due to its high concentration of active ingredients,...
DEFOAMER ML is a highly concentrated oil based defoamer for use in non-potable water systems. Due to its high concentration of active ingredients, relatively small quantities are needed to either destroy foam or prevent foam formation. DEFOAMER ML has been formulated to disperse rapidly and completely in systems where little agitation is possible.
PACKAGING VARIATIONS
15 Gal Drum, 30 Gal Drum, 55 Gal Drum, 275 Gal Tote
DEFOAMER ML should be delivered into the system neat; not premixed with water because of separation of the active ingredients may occur. Injection into a feed pipe and mixing in the feed is acceptable because the entire package is being delivered at the same time.
Use concentrations can range from 20 PPM to .25% depending on the application and severity of foam. Prevention of foam formation is always preferable to “killing” of foam.
PHYSICAL PROPERTIES
Color: Semi-transparent light yellow liquid
Odor: Mild oil
Specific Gravity: .919
Pounds/Gallon: 7.64
Ionic Characteristics: Nonionic
Solubility: Partially soluble in water. Completely soluble in oil and non-polar solvents.
Stability: Freezing point is well below freezing. If separation occurs, product can be reconstituted by mixing.
DEFOAMER ML-2 is a highly concentrated oil based defoamer for use in non-potable water systems. Due to its high concentration of active ingredients,...
DEFOAMER ML-2 is a highly concentrated oil based defoamer for use in non-potable water systems. Due to its high concentration of active ingredients, relatively small quantities are needed to either destroy foam or prevent foam formation. DEFOAMER ML-2 has been formulated to disperse rapidly and completely in systems where little agitation is possible.
PACKAGING VARIATIONS
15 Gal Drum, 30 Gal Drum, 55 Gal Drum, 275 Gal Tote
DEFOAMER ML-2 should be delivered into the system neat. If premixed with water, do so at time of injection because separation of the active ingredients may occur. Injection into a feed pipe and mixing in the feed is acceptable because the entire package is being delivered at the same time.
Use concentrations can range from 20 PPM to .25% depending on the application and severity of foam. Prevention of foam formation is always preferable to “killing” of foam.
PHYSICAL PROPERTIES
Color: Semi-transparent light yellow liquid.
Odor: Mild oil
Specific Gravity: .919
Pounds/Gallon: 7.64
Ionic Characteristics: Nonionic
Solubility: Soluble in water.
Stability: Freezing point is well below freezing. If separation occurs, product can be reconstituted by mixing.
DEFOAMER ML-X is a highly concentrated oil based defoamer for use in non-potable water systems. Due to its high concentration of active ingredients,...
DEFOAMER ML-X is a highly concentrated oil based defoamer for use in non-potable water systems. Due to its high concentration of active ingredients, relatively small quantities are needed to either destroy foam or prevent foam formation. DEFOAMER ML-X has been formulated to disperse rapidly and completely in systems where little agitation is possible.
PACKAGING VARIATIONS
15 Gal Drum, 30 Gal Drum, 55 Gal Drum, 275 Gal Tote
DEFOAMER ML-X should be delivered into the system neat. If premixed with water, do so at time of injection because separation of the active ingredients may occur. Injection into a feed pipe and mixing in the feed is acceptable because the entire package is being delivered at the same time.
Use concentrations can range from 20 PPM to .25% depending on the application and severity of foam.
Prevention of foam formation is always preferable to “killing” of foam.
PHYSICAL PROPERTIES
Color: Semi-transparent light yellow liquid.
Odor: Mild oil
Specific Gravity: .919
Pounds/Gallon: 7.64
Ionic Characteristics: Nonionic
Solubility: Soluble in water.
Stability: Freezing point is well below freezing. If separation occurs, product can be reconstituted by mixing.
DEFOAMER MO 10K is a highly concentrated mineral oil antifoam. It is a combination of mineral oils plus other non-silicone defoaming agents to give...
DEFOAMER MO 10K is a highly concentrated mineral oil antifoam. It is a combination of mineral oils plus other non-silicone defoaming agents to give the widest possible use application. It is highly effective in both defoaming and preventing foam formation. DEFOAMER MO 10K has been designed as a food-grade Kosher product that meeting the requirements of CFR 173.340.
APPLICATIONS:
DEFOAMER MO 10K is most effective in aqueous systems. Depending on the application, concentrations of 15% to 50% may be needed to achieve a suitable defoaming action. In many cases, results can be obtained by using even lower dilutions.
PHYSICAL PROPERTIES:
Color: White
Physical Form: Semi- viscous emulsion
Viscosity: 2500 5000 cps
Pounds Per Gallon: 8.25
Type: Nonionic, mineral oil based
Solubility: Readily dispersible in water
Stability: Very stable product If frozen, separation may occur
Passes centrifugal testing @ 3300 rpm with no separation
DEFOAMER NSP is a nonsilicone defoamer/antifoam designed for the paper industry. It can be used to both prevent foam as an antifoam and destroy foam...
DEFOAMER NSP is a nonsilicone defoamer/antifoam designed for the paper industry. It can be used to both prevent foam as an antifoam and destroy foam as a defoamer. It does not contain VOC’s and is biodegradable which makes it perfect for today’s environmentally sensitive workplace.
PACKAGING VARIATIONS
15 Gal Drum, 30 Gal Drum, 55 Gal Drum, 275 Gal Tote
DEFOAMER NSP should be added to the head box, the pulping tank or to some point prior to sheet formation. Add it to a location where there is a good deal of agitation to ensure that it is completely dispersed throughout the pulp suspension. Since each mill has different foaming problems, it is best to start with the amount of defoamer currently being used.
PHYSICAL PROPERTIES
Appearance: White semiviscous liquid
Odor: Mild to odorless
Ionic Characteristics: Nonionic
pH: 8.0
Dispersibility in water: Readily Disperses
DEFOAMER NSP-3 is a nonsilicone defoamer/antifoam designed for the textile, inks, coatings, and paper industries. It can be used to both prevent foam...
DEFOAMER NSP-3 is a nonsilicone defoamer/antifoam designed for the textile, inks, coatings, and paper industries. It can be used to both prevent foam as an antifoam and destroy foam as a defoamer. It does not contain VOC’s and is biodegradable which makes it perfect for today’s environmentally sensitive workplace.
PACKAGING VARIATIONS
15 Gal Drum, 30 Gal Drum, 55 Gal Drum, 275 Gal Tote
PAPER: Defoamer NSP-3 should be added to the head box, the pulping tank or to some point prior to sheet formation. Add it to a location where there is a good deal of agitation to ensure that it is completely dispersed throughout the pulp suspension. Since each mill has different foaming problems, it is best to start with the amount of defoamer currently being used.
COATINGS & INK: add to the initial grind to prevent air entrapment. Adding additional product during letdown will help ensure a foam-free product. Usage recommendation: .5 – 1.5% depending on need.
TEXTILES: Defoamer NSP-3 is designed for use in both atmospheric and pressure equipment. It can be dispersed manually or with automated equipment. Usage varies depending on application. The starting point should be .25% OWF. Decrease or increase the amount as needed.
PHYSICAL PROPERTIES
Appearance: White semiviscous liquid
Odor: Mild to odorless
Ionic Characteristics: Nonionic
pH: 8.0
Dispersibility in water: Readily Disperses
DEFOAMER NZ-49 is a highly concentrated modified silicone antifoam developed specially for the treatment of foam problems in water systems. It is a...
DEFOAMER NZ-49 is a highly concentrated modified silicone antifoam developed specially for the treatment of foam problems in water systems. It is a combination of 12% silicone oils plus other non-silicone defoaming agents to give the widest possible use application. It is highly effective in both defoaming and preventing foam formation. DEFOAMER NZ-49 will work well in a wide range of pH and temperatures.
PACKAGING VARIATIONS
15 Gal Drum, 30 Gal Drum, 55 Gal Drum, 275 Gal Tote
DEFOAMER NZ-49 is most effective in aqueous systems. Depending on the application, concentrations of .01% to .50% may be needed to achieve a suitable defoaming action. In many cases, results can be obtained by using even lower dilutions. It has been determined that to defoam typical waste water with foam caused by nonionic and anionic surfactants that a rule of thumb is to use 1/5 the amount of defoamer to surfactant to prevent foam in waste water. For instance, if you identify that you have 100 ppm soaps for detergents, start with 20 ppm of Defoamer NZ-49. DEFOAMER NZ-49 is approximately 20% more active than our DEFOAMER WTC-10.
PHYSICAL PROPERTIES
Color: White
Physical Form: Semi-viscous emulsion
Viscosity: 1700 – 2500 cps
Pounds per gallon: 8.3
pH: 7-8
Type: Nonionic, modified silicone based
Solubility: Readily dispersible in water
Stability: Very stable product. If frozen, separation may occur.
DEFOAMER VO is a Kosher certified, scientifically formulated, highly active, vegetable oil-based Defoamer that contains NO silicone. The product is...
DEFOAMER VO is a Kosher certified, scientifically formulated, highly active, vegetable oil-based Defoamer that contains NO silicone. The product is very active, and only small quantities are necessary to maintain adequate foam control. Uses include food contact, printing, dyeing, and other applications where no amount of silicone can be tolerated. This product conforms to CFR 173.340.
ADVANTAGES:
-Eliminates foaming caused by dispersants, additives, and chemical cleaners
- Will not spot.
- Forms stable dispersions
- Highly effective - exceedingly small amounts of product are required
- Has sustained effect.
PHYSICAL PROPERTIES:
Color: Off-White to Yellow Liquid
Odor: Odorless
Solubility: Emulsifies in water
Ionic Type: Nonionic
Density: 1.03 g/ml
Viscosity: 2,000 3,000 cps @ 78 F
Package: HDPE 275-Gallon IBC, 55-Gallon drum
Shelf Life: 12 Months
DEFOAMER WA is a scientifically formulated food grade defoamer containing low silicone derivates. The product is very active and only small...
DEFOAMER WA is a scientifically formulated food grade defoamer containing low silicone derivates. The product is very active and only small quantities are necessary to maintain adequate foam control. Uses include food contact cleaning, printing, dyeing, and other applications where a small amount of silicone can be tolerated.
PACKAGING VARIATIONS
15 Gal Drum, 30 Gal Drum, 55 Gal Drum, 275 Gal Tote
- Eliminates foaming caused by dispersants, additives, or chemical cleaners.
- Will not spot.
- Forms stable dispersions.
- Highly effective - exceedingly small amounts needed.
- Has a sustained effect.
- No defoamer scum ring on equipment.
- Non-toxic.
- Completely biodegradable - will not pollute.
APPLICATION
DEFOAMER WA may be used at .10 - .50% levels or less. Application concentrations are determined by the degree of foam encountered. Best results are achieved when DEFOAMER WA is injected into the system prior to foam formation.
DEFOAMER WTC-10 is a highly concentrated modified silicone antifoam developed specially for the treatment of foam problems in water systems. It is a...
DEFOAMER WTC-10 is a highly concentrated modified silicone antifoam developed specially for the treatment of foam problems in water systems. It is a combination of 10% silicone oils plus other non-silicone defoaming agents to give the widest possible use application. It is highly effective in both defoaming and preventing foam formation. DEFOAMER WTC-10 will work well in a wide range of pH and temperatures.
PACKAGING VARIATIONS
15 Gal Drum, 30 Gal Drum, 55 Gal Drum, 275 Gal Tote
DEFOAMER WTC-10 is most effective in aqueous systems. Depending on the application, concentrations of .015% to .50% may be needed to achieve a suitable defoaming action. In many cases, results can be obtained by using even lower dilutions. It has been determined that to defoam typical waste water with foam caused by nonionic and anionic surfactants that a rule of thumb is to use 1/5 the amount of defoamer to surfactant to prevent foam in waste water. For instance, if you identify that you have 100 ppm soaps for detergents, start with 20 ppm of Defoamer WTC-10.
For best results, DEFOAMER WTC-10 should be added at a point in the system prior to the foam formation. It should be thoroughly mixed to ensure the most economical performance. A good place to introduce WTC-10 is just ahead of the waste water discharge pump, this promotes dispersion of the product.
PHYSICAL PROPERTIES
Color: White
Physical Form: Semi-viscous emulsion
Viscosity: 2500 – 4000 cps
Pounds per gallon: 8.38
Type: Nonionic, modified silicone based
Solubility: Readily dispersible in water
Stability: Very stable product. If frozen, separation may occur.
DEFOAMER WTC-15 is a highly concentrated modified silicone antifoam developed specially for the treatment of foam problems in water systems. It is a...
DEFOAMER WTC-15 is a highly concentrated modified silicone antifoam developed specially for the treatment of foam problems in water systems. It is a combination of 15% silicone oils plus other non-silicone defoaming agents to give the widest possible use application. It is highly effective in both defoaming and preventing foam formation. DEFOAMER WTC-15 will work well in a wide range of pH and temperatures.
PACKAGING VARIATIONS
15 Gal Drum, 30 Gal Drum, 55 Gal Drum, 275 Gal Tote
DEFOAMER WTC-15 is most effective in aqueous systems. Depending on the application, concentrations of 0.005% to 0.25% may be needed to achieve a suitable defoaming action. In many cases, results can be obtained by using even lower dilutions.
For best results, DEFOAMER WTC-15 should be added at a point in the system prior to the foam formation. It should be thoroughly mixed to ensure the most economical performance.
PHYSICAL PROPERTIES
Color: White
Physical Form: Semi-viscous emulsion
Odor: Mild, pleasant
Pounds/Gallon: 8.38
Type: Nonionic, modified silicone based
Solubility: Readily soluble in water
Stability: Very stable product. If frozen, separation may occur, but can be reconstitued upon thawing.
DEFOAMER WTC-20 is a highly concentrated modified silicone antifoam developed specially for the treatment of foam problems in water systems. It is a...
DEFOAMER WTC-20 is a highly concentrated modified silicone antifoam developed specially for the treatment of foam problems in water systems. It is a combination of 20% silicone oils plus other non-silicone defoaming agents to give the widest possible use application. It is highly effective in both defoaming and preventing foam formation. DEFOAMER WTC-20 will work well in a wide range of pH and temperatures.
PACKAGING VARIATIONS
15 Gal Drum, 30 Gal Drum, 55 Gal Drum, 275 Gal Tote
DEFOAMER WTC-20 is most effective in aqueous systems. Depending on the application, concentrations of 0.0025% to 0.12% may be needed to achieve a suitable defoaming action. In many cases, results can be obtained by using even lower dilutions.
For best results, DEFOAMER WTC-20 should be added at a point in the system prior to the foam formation. It should be thoroughly mixed to ensure the most economical performance.
PHYSICAL PROPERTIES
Color: White
Physical Form: Semi-viscous emulsion
Odor: Mild, pleasant
Pounds/Gallon: 8.5
Type: Nonionic, modified silicone based
Solubility: Readily soluble in water
Stability: Very stable product. If frozen, separation may occur.
DEFOAMER WTC-30 is a highly concentrated modified silicone antifoam developed specially for the treatment of foam problems in water systems. It is a...
DEFOAMER WTC-30 is a highly concentrated modified silicone antifoam developed specially for the treatment of foam problems in water systems. It is a combination of 30% silicone oils plus other non-silicone defoaming agents to give the widest possible use application. It is highly effective in both defoaming and preventing foam formation. DEFOAMER WTC-30 will work well in a wide range of pH and temperatures.
PACKAGING VARIATIONS
15 Gal Drum, 30 Gal Drum, 55 Gal Drum, 275 Gal Tote
DEFOAMER WTC-30 is most effective in aqueous systems. Depending on the application, concentrations of .005% to .25% may be needed to achieve a suitable defoaming action. In many cases, results can be obtained by using even lower dilutions.
For best results, DEFOAMER WTC-30 should be added at a point in the system prior to the foam formation. If should be thoroughly mixed to ensure the most economical performance.
If used to defoam a static foam problem, agitation or sprays may be necessary.
PHYSICAL PROPERTIES
Color: White
Physical Form: Semi-viscous emulsion.
Odor: Mild, pleasant.
Pounds per gallon: 8.38
Type: Nonionic, modified silicone based.
Solubility: Readily soluble in water.
Stability: Very stable product. If frozen, separation may occur.
DEFOAMER XK-7 is a highly concentrated modified silicone antifoam developed specifically for the treatment of foam problems in water systems. This...
DEFOAMER XK-7 is a highly concentrated modified silicone antifoam developed specifically for the treatment of foam problems in water systems. This product combines 7 active ingredients, which help to tackle all types of foam and at temperatures between 35 F - 150 F. It is a combination of silicone oils plus other non-silicone defoaming agents. DEFOAMER XK-7 is designed as a food grade. Kosher product and meets requirements of CFR 173.340.
DEFOAMER XK-7 is most effective in aqueous systems. Depending on the application, concentrations of .005% to 0.50% may be needed to achieve a suitable defoaming action. In many cases, results can be obtained by using even lower dilutions. It has been determined that to defoam typical wastewater with foam caused by nonionic and anionic surfactants, a rule of thumb is to use 1/5 the amount of Defoamer to surfactant to prevent foam in wastewater. For instance, if you identify that you have 100 ppm soaps for detergents, start with 20 ppm of DEFOAMER XK-7. It utilizes multiple defoaming chemistries and is up to five times more effective than DEFOAMER WTC-10.
For best results, DEFOAMER KEYSTONE XK-7 should be added at the point in the system prior to foam formation. It should be thoroughly mixed to ensure the most economical performance. A good place to introduce KEYSTONE XK-7 is just ahead of the wastewater discharge pump. This will promote dispersion of the product.
For best results, DEFOAMER EFS-XK-7 should be added at a point in the system prior to foam formation. It should be thoroughly mixed to ensure the most economical performance. A good place to introduce XK-7 is just ahead of the wastewater discharge pump. This promotes dispersion of the product.
PHYSICAL PROPERTIES:
Color: White/Off-White
Physical Form: Semi- viscous emulsion
Viscosity: 1000 2000 cps
Actives: 30%
Pounds Per Gallon: 8.25
Type: Nonionic, modified silicone based
Solubility: Readily dispersible in water
Stability: Very stable product If frozen, separation may occur
MIRAFLOC is a complete waste water treatment formulation designed to both flocculate out suspended solids and remove dissolved metals such as lead,...
MIRAFLOC is a complete waste water treatment formulation designed to both flocculate out suspended solids and remove dissolved metals such as lead, mercury, nickel, zinc, and copper. This helps ensure that a plant’s waste water meets or exceeds certain restrictions on heavy metals as well as suspended solids and color.
PACKAGING VARIATIONS
15 Gal Drum, 30 Gal Drum, 55 Gal Drum, 275 Gal Tote
MIRAFLOC works best at a pH between 8-10. Raise the pH to between 9 and 10 using either Pharagent S or caustic soda. With some agitation, add MIRAFLOC. The amount required will depend on the amount of suspended solids. Usually, .025% to .1% is sufficient. Once MIRAFLOC is added, recheck the pH to ensure that it is still 8-10. At this point, the floc will either sink or float depending on the specific gravity of the suspended solids.
Of the floc sinks, decant off the clear water and either return to your process for reuse or send down the drain. If the floc floats, either take the clear water from the bottom or skim off the floc.
The floc will have to be discarded in accordance with federal, state, and local regulations, depending on the characteristics of the waste being generated.
SPECIFICATIONS
Appearance: Clear liquid
Specific Gravity: 1.23
Weight/gallon: 10.26 lbs./gallon
pH: 2.0 to 3.0
Solids: 37% ± 1%
MIRAFLOC 100 is a complete wastewater treatment formulation designed to both flocculate out suspended solids and remove dissolved metals such as...
MIRAFLOC 100 is a complete wastewater treatment formulation designed to both flocculate out suspended solids and remove dissolved metals such as lead, mercury, nickel, zinc, and copper. This helps ensure that a plant’s waste water meets or exceeds certain restrictions on heavy metals as well as suspended solids and color.
PACKAGING VARIATIONS
15 Gal Drum, 30 Gal Drum, 55 Gal Drum, 275 Gal Tote
MIRAFLOC 100 works best at a pH between 8-10. Raise the pH to between 9 and 10 using either Pharagent S or caustic soda. With some agitation, add MIRAFLOC 100. The amount required will depend on the amount of suspended solids. Usually, .025% to .1% is sufficient. Once MIRAFLOC 100 is added, recheck the pH to ensure that it is still 8-10. At this point, the floc will either sink or float depending on the specific gravity of the suspended solids.
If the floc sinks, decant off the clear water and either return to your process for reuse or send down the drain. If the floc floats, either take the clear water from the bottom or skim off the floc.
The floc will have to be discarded in accordance with federal, state, and local regulations, depending on the characteristics of the waste being generated.
SPECIFICATIONS
Appearance: Clear liquid
Specific Gravity: 1.23
Weight/gallon: 10.26 lbs./gallon
pH: 2.0 to 3.0
Solids: 37% ± 1%
