MiraFloc 100

MiraFloc 100

MIRAFLOC 100 is a complete wastewater treatment formulation designed to both flocculate out suspended solids and remove dissolved metals such as lead, mercury, nickel, zinc, and copper. This helps ensure that a plant’s waste water meets or exceeds certain restrictions on heavy metals as well as suspended solids and color.

PACKAGING VARIATIONS

15 Gal Drum, 30 Gal Drum, 55 Gal Drum, 275 Gal Tote

Product Information Sheet
Product Label

DIRECTIONS

MIRAFLOC 100 works best at a pH between 8-10. Raise the pH to between 9 and 10 using either Pharagent S or caustic soda. With some agitation, add MIRAFLOC 100. The amount required will depend on the amount of suspended solids. Usually, .025% to .1% is sufficient. Once MIRAFLOC 100 is added, recheck the pH to ensure that it is still 8-10. At this point, the floc will either sink or float depending on the specific gravity of the suspended solids.

If the floc sinks, decant off the clear water and either return to your process for reuse or send down the drain. If the floc floats, either take the clear water from the bottom or skim off the floc.

The floc will have to be discarded in accordance with federal, state, and local regulations, depending on the characteristics of the waste being generated.

SPECIFICATIONS

Appearance: Clear liquid
Specific Gravity: 1.23
Weight/gallon: 10.26 lbs./gallon
pH: 2.0 to 3.0
Solids: 37% ± 1%

Additional information

Packaging Variations

15 Gal Drum, 30 Gal Drum, 55 Gal Drum, 275 Gal Tote