Defoamer NZ-49

Defoamer NZ-49

DEFOAMER NZ-49 is a highly concentrated modified silicone antifoam developed specially for the treatment of foam problems in water systems. It is a combination of 12% silicone oils plus other non-silicone defoaming agents to give the widest possible use application. It is highly effective in both defoaming and preventing foam formation. DEFOAMER NZ-49 will work well in a wide range of pH and temperatures.

PACKAGING VARIATIONS

15 Gal Drum, 30 Gal Drum, 55 Gal Drum, 275 Gal Tote

Product Information Sheet
Product Label

APPLICATIONS

DEFOAMER NZ-49 is most effective in aqueous systems. Depending on the application, concentrations of .01% to .50% may be needed to achieve a suitable defoaming action. In many cases, results can be obtained by using even lower dilutions. It has been determined that to defoam typical waste water with foam caused by nonionic and anionic surfactants that a rule of thumb is to use 1/5 the amount of defoamer to surfactant to prevent foam in waste water. For instance, if you identify that you have 100 ppm soaps for detergents, start with 20 ppm of Defoamer NZ-49. DEFOAMER NZ-49 is approximately 20% more active than our DEFOAMER WTC-10.

PHYSICAL PROPERTIES

Color: White
Physical Form: Semi-viscous emulsion
Viscosity: 1700 – 2500 cps
Pounds per gallon: 8.3
pH: 7-8
Type: Nonionic, modified silicone based
Solubility: Readily dispersible in water
Stability: Very stable product. If frozen, separation may occur.

Additional information

Packaging Variations

15 Gal Drum, 30 Gal Drum, 55 Gal Drum, 275 Gal Tote