Defoamer ML-2

Defoamer ML-2

DEFOAMER ML-2 is a highly concentrated oil based defoamer for use in non-potable water systems. Due to its high concentration of active ingredients, relatively small quantities are needed to either destroy foam or prevent foam formation. DEFOAMER ML-2 has been formulated to disperse rapidly and completely in systems where little agitation is possible.

PACKAGING VARIATIONS

15 Gal Drum, 30 Gal Drum, 55 Gal Drum, 275 Gal Tote

Product Information Sheet
Product Label

APPLICATION

DEFOAMER ML-2 should be delivered into the system neat. If premixed with water, do so at time of injection because separation of the active ingredients may occur. Injection into a feed pipe and mixing in the feed is acceptable because the entire package is being delivered at the same time.

Use concentrations can range from 20 PPM to .25% depending on the application and severity of foam. Prevention of foam formation is always preferable to “killing” of foam.

PHYSICAL PROPERTIES

Color: Semi-transparent light yellow liquid.
Odor: Mild oil
Specific Gravity: .919
Pounds/Gallon: 7.64
Ionic Characteristics: Nonionic
Solubility: Soluble in water.
Stability: Freezing point is well below freezing. If separation occurs, product can be reconstituted by mixing.

Additional information

Packaging Variations

15 Gal Drum, 30 Gal Drum, 55 Gal Drum, 275 Gal Tote